--- Query Results --- | |||||||||||||||
Organization: | Alberta Precision Laboratories | ||||||||||||||
Message Alert: | PLEASE NOTE: This Test Directory is in an interim state and due to changes pertaining to the DynaLIFE transition, performing site for routing has not been updated. Please refer to Laboratory Information System for appropriate routing. | ||||||||||||||
Test Name/Synonym: | ADAMTS13 Activity (Synonym: ADAMTS Evaluation, ADAMTS13 Inhibitor, ADAMTS13 Antibody, VWF Cleaving Protease, ADAM13, ADAM-13, ADAMS13, ADAMS 13, ADAMS13, ADAMSTS13, ADAMSTS 13, ADAMSTS-13, Metallprotease, Thrombotic Microangiopathy ) | ||||||||||||||
Test Includes: | ADAMTS13 Antibody testing will be performed if ADAMTS13 Activity is <0.20 U/mL | ||||||||||||||
Ordering Alert: | All Hospitals (Inpatients and Outpatient collection labs) can collect. For community Patient Service Centres (PSC), testing can ONLY be collected at the PSCs listed below. | ||||||||||||||
Shipping and Handling Alert: | Specimens are time sensitive. Sample must be received in laboratory within 30 minutes from collection to allow time for processing and freezing. | ||||||||||||||
LABID (Connect Care): | LAB4336 | ||||||||||||||
Specimen Type: | Blood | ||||||||||||||
Primary Container: | LT BLUE CITRATE | ||||||||||||||
Minimum Collection Volume: | Two 2.7 mL LT blue citrate tube, allow the vacuum tube to completely fill, minimum fill is to frosted line on tube. | ||||||||||||||
Specimen Collection Requirements: | It is important to fill tube to maximum draw. Mix well immediately after collection by inverting tube 3 to 4 times. If venous access is not available, sample can be drawn from a line but 6x the volume of the line or 5 mL (whichever is less) must be removed prior to collection. When using a winged blood collection set (butterfly needle), a discard tube must be used to remove the air in the tubing, if only a citrate tube is drawn or is the first tube drawn.
| ||||||||||||||
Test Resources: |
| ||||||||||||||
Stability and Storage: | Room temperature - 1 hour | ||||||||||||||
Processing: | Centrifuge to obtain platelet poor plasma (platelet count <10 x 109/L). Plasma should be frozen within 1 hour of collection. If delayed, still proceed with aliquoting. Using a plastic pipette and polypropylene aliquot tubes, aliquot plasma into 4 aliquots of 0.5 mL and freeze. On all aliquots, clearly indicate on the label “Frozen @____hrs.” Platelet poor plasma must be prepared in accordance with the College of Physician and Surgeons of Alberta (CPSA) Laboratory Standard H.4.3.4. This must include procedures for regular verification that centrifuge(s) reliably produce plasma containing <10 x 109/L residual platelets. Please contact Special Coagulation in Edmonton 780-407-8487 for detailed instructions. | ||||||||||||||
Transportation: | Frozen (dry ice if available) Specimens must maintain frozen state for entire duration of transport. | ||||||||||||||
Routine Turn Around Time: |
ADAMTS13 Antibody: 1 week after the ADAMTS13 Activity is resulted (not 1 week after collection). | ||||||||||||||
Testing Schedule: | Monday - Friday, excluding STAT Holidays | ||||||||||||||
Reference Interval: |
| ||||||||||||||
Testing Area: | Special Coagulation | ||||||||||||||
Performing Site: | University of Alberta Hospital | ||||||||||||||
Contact Comments: | 1-877-868-6848 | ||||||||||||||
Last Updated On: | Wednesday, December 4, 2024 |